E10: Tight tape error Cause(s): A restricted cassette tape transport or broken cassette belt drive Correction: Substitute a different cassette tape. If there still is an error code, service the unit at an ACDelcoÃ'® Service Center.

E11: Broken Tape Error Cause(s): A broken cassette tape Correction(s): Substitute a different cassette tape

E12: Communication Error Cause(s): A vehicle/radio communication problem or an internal radio communication problem Correction(s): Disconnect the battery voltage to the radio, em seguida, reconnect after a few minutes. If there still is an error, service the unit at an ACDelcoÃ'® Service Center.

E13: Tape Communication Error Cause(s): The micro-processor is reading the speed pulses from the tape deck either too fast or too slow. Correction(s): It the tape player is still de jogar a cassette, try a new cassette. If there is still an error, service the unit at an ACDelcoÃ'® Service Center.

E14: Wrapped Tape Cause(s): The tape não wrapped around the capstan. This means a tape não wound up in the tape player. This error message could appear when a CD adapter is being used. Other causes could be old or damaged tapes. Long playing (90 or 120 minute) tapes está thin and can trecho easily creating esta condição. Correction(s): Try de jogar a known good quality tape. Remova o CD adapter.
C
ln Tape Indicator Cause(s): This message aparece after 50 hours of accumulated tape play. Correction(s): We suggest cleaning the tape head. Then reset the radio by depressing the eject button for five seconds. Cleaning the heads will not reset the "Cln" display. To reset the "Cln" display, push and hold the eject button for five seconds. The display will return to its normal de exibição.


CD Errors

E20: Focus Error Cause(s): o CD player não é possível focus on the disc or there is an internal focus problem. Correction(s): Try cleaning the disc or using a new disc. Make sure the disc is loaded corretamente. The road could be too rough or there is too much humidity. If the problem is not corrected, service the unit at an ACDelcoÃ'® Service Center.

E21: Tracking Error Cause(s): There is a problem reading with the disc Correction(s): Try cleaning the disc or using a new disc. Make sure the disc is loaded corretamente. The road could be too rough or there is too much humidity. If there is still an error, service the unit at an ACDelcoÃ'® Service Center.

E22: Motor Error Cause(s): o CD de motor não é handling the compact disc properly. Correction(s): Service or exchange the unit at an ACDelcoÃ'® Service Center.

E23: Communications Error Cause(s): There is a vehicle/radio communication problem or an internal radio communication problem. Correction(s): battery voltage Disconnect to the radio and then reconnect after a few minutes. If there is still an error, send the unit to an ACDelcoÃ'® Service Center.


LLAI CD Changer Errors

E30: Focus Error Cause(s): o CD player não é possível focus on the disc or there is an internal focus problem. Correction(s): Try cleaning the disc or using a new disc. Make sure the disc is loaded corretamente. The road could be too rough or there is too much humidity. If there is still an error, service the unit at an ACDelcoÃ'® Service Center.

E31: Tracking Error Cause(s): There is a problem reading with the disc. Correction(s): Try cleaning the disc or try using a new disc. Make sure the disc is loaded corretamente. The road could be too rough or there is too much humidity. If there is still an error, service the unit at an ACDelcoÃ'® Service Center.

E32: Motor Error Cause(s): o CD de motor não é handling the compact disc properly or defective magazine mounting screws está interfering with the mechanism. Correction(s): Reload the magazine. If there is still a problem, replace the magazine. If the problem continues, back out the mounting screws. If the condition is corrigido primeiro, replace the screws with shorter screws or add washers to the existing screws. If this condition still exists, service the unit at an ACDelcoÃ'® Service Center.

E33: CD Changer Communication Error Cause(s): There is a vehicle/radio communication problem or internal radio communication problem. Correction(s): battery voltage Disconnect to the radio and then reconnect after a few minutes. If there is still an error, determine if the problem is with the radio, the harness or the voice changer. Inspect correct for voltage at all connectors. If there is still an error, service the unit at an ACDelcoÃ'® Service Center.

E34: Changer Open Door

E35: Changer Magazine Empty


FMI 10-Disc Changer Errors

E01 Cause: This indicates a malfunction of the disc changer functions. Correction: Before sending the unit in for service, realizar o seguinte procedimento:
Pressione o botão de reset on both the voice changer and the remote. The reset button on the voice changer is located on the front panel of the unit. It can be activated with the tip of a pin.
Se o aparelho não funcionar depois de redefini-lo, remova a revista através da inserção de um cartão de negócios entre a revista e o mecanismo. A alavanca de bloqueio desengata-se para permitir que a revista ejetar.
Se certificar que todos os CDs are in the magazine and none remain lodged in the carriage. If, em cima do removing the magazine, a CD is found lodged in the carriage, remove all CDs from the magazine and reintroduzir the magazine into the voice changer.
Press the eject button. This should cause the lodged CD to move from the carriage into the empty magazine. The magazine should automatically eject and normal operation will return.
If the voice changer fails to resume normal de operação, send the unit to an ACDelcoÃ'® Service Center.

E30 Cause: Excessive temperatura Correction: Let the temperature of the changer resume to the normal range.